现货Schneider交流接触器LC1D09M7C全新正品

现货Schneider交流接触器LC1D09M7C全新正品

产品系列    
TeSys
产品名称    
D
产品类型    
接触器
产品短名    
LC1D
接触器应用领域    
应用于功率因数大于等于0.95的交流负载中
应用于接通分断正常启动的鼠笼电机
使用类别    
AC-4
AC-1
AC-3
极数    
3P
power pole contact composition    
3 NO
额定工作电流 [Ie]    
25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
9 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
控制回路电压    
220 V AC 50/60 Hz
辅助触点类型    
1 NO + 1 NC
补充信息
额定工作电压 [Ue]    
Power circuit: <= 690 V AC 25...400 Hz
电源回路: <= 225 V DC
电动机功率 (kW)    
5.5 kW at 500 V AC 50/60 Hz (AC-3)
2.2 kW 在…上 220/240 V AC 50/60 Hz (AC-3)
4 kW 在…上 380/400 V AC 50/60 Hz (AC-3)
4 kW 在…上 415/440 V AC 50/60 Hz (AC-3)
5.5 kW 在…上 660/690 V AC 50/60 Hz (AC-3)
2.2 kW 在…上 400 V AC 50/60 Hz (AC-4)
电气寿命    
0.6 Mcycles 25 A AC-1 at Ue <= 440 V
2 Mcycles 9 A AC-3 at Ue <= 440 V
2 Mcycles 6.6 A AC-3 at Ue 660/690 V
机械寿命    
15 Mcycles
操作频率    
3600 cyc/h 60 °C
动作时间    
12...22 ms closing
4...19 ms opening
控制电压限额    
Drop-out: 0.3...0.6 Uc at 50/60 Hz (at <60 °C)
Operational: 0.8...1.1 Uc at 50 Hz (at <60 °C)
Operational: 0.85...1.1 Uc at 60 Hz (at <60 °C)
(~50Hz保持)功耗 (VA)    
7.5 VA 60 Hz cos phi 0.3 (at 20 °C)
7 VA 50 Hz cos phi 0.3 (at 20 °C)
约定发热电流 [Ith]    
25 A (at 60 °C) for power circuit
10 A (at 60 °C) for signalling circuit
平均阻抗    
2.5 mOhm - Ith 25 A 50 Hz for power circuit
热消散    
2…3 W at 50/60 Hz
额定短时耐受电流 [Icw]    
105 A 40 °C - 10 s for power circuit
210 A 40 °C - 1 s for power circuit
30 A 40 °C - 10 min for power circuit
61 A 40 °C - 1 min for power circuit
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
与继电器配合使用的熔丝    
10 A gG for signalling circuit conforming to IEC 60947-5-1
25 A gG at <= 690 V coordination type 1 for power circuit
20 A gG at <= 690 V coordination type 2 for power circuit
过电压类别    
III
额定绝缘电压 [Ui]    
Power circuit: 690 V conforming to IEC 60947-4-1
Signalling circuit: 690 V conforming to IEC 60947-1
浪涌抑制模块    
无内置浪涌抑制模块
辅助触点类型    
type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
type mirror contact 1 NC conforming to IEC 60947-4-1
信号回路频率    
25...400 Hz
最小开关电流 [Imin]    
5 mA for signalling circuit
不重迭时间    
1.5 ms on de-energisation between NC and NO contact
1.5 ms on energisation between NC and NO contact
绝缘电阻    
> 10 MOhm for signalling circuit
安装方式    
导轨安装
底板安装
接线能力    
Power circuit: screw clamp terminals 1 1…4 mm² - external diameter: 8 mm - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 2 1…4 mm² - external diameter: 8 mm - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 1 1…4 mm² - external diameter: 8 mm - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 2 1…2.5 mm² - external diameter: 8 mm - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 1 1…4 mm² - external diameter: 8 mm - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 2 1…4 mm² - external diameter: 8 mm - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end
电源回路: 螺钉连接
紧固扭矩    
Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
控制回路: 1.7 N.m 通过 螺栓紧固 用螺丝刀 Ø 6 平口
控制回路: 1.7 N.m 通过 螺栓紧固 用螺丝刀 No 2 十字螺丝
电源回路: 1.7 N.m 通过 电缆连接器 用螺丝刀 Ø 6 平口 螺丝: M3.5
电源回路: 1.7 N.m 通过 电缆连接器 用螺丝刀 No 2 十字螺丝 螺丝: M3.5
高度    
77 mm
宽度    
45 mm
深度    
86 mm
控制回路特性    
AC at 50/60 Hz
额定冲击耐受电压 [Uimp]    
6 kV conforming to IEC 60947
safety cover    
无
(~50Hz吸合)功耗 (VA)    
70 VA 60 Hz cos phi 0.75 (at 20 °C)
70 VA 50 Hz cos phi 0.75 (at 20 °C)
产品净重    
0.32 kg
接触器兼容特性    
M2
型号    
LC1D
环境
符合标准    
IEC 60947-4-1
GB 14048.4
产品认证    
CCC
污染等级    
3
防护措施    
TH conforming to IEC 60068-2-30
IP 保护等级    
IP2x 前面板 主回路适用 符合 IEC 60529
IP2x 前面板 线圈回路适用 符合 IEC 60529
运行温度    
-40…60 °C
贮存环境温度    
-60…80 °C
周围空气温度    
60…70 °C （Uc下允许）
工作海拔    
3000 m without derating
耐火及耐异常高温能力    
850 °C conforming to IEC 60695-2-11
抗冲击、震动性能    
抗震性能 触头打开 (2 gn (5...300 Hz)) 符合 IEC 60068-2-6
抗震性能 触头闭合状态 (4 gn (5...300 Hz)) 符合 IEC 60068-2-6
抗冲击性能 11 ms 触头打开 (10 gn) 符合 IEC 60068-2-27
抗冲击性能 11 ms 触头闭合状态 (15 gn) 符合 IEC 60068-2-27
质量标识    
CE 声明
Packing Units
包装1的单位类别    
PCE
个/公斤    
1
包装重量    
360.78 g
包装1高度    
5.03 cm
包装1宽度    
7.83 cm
包装1长度    
9.27 cm

现货Schneider交流接触器LC1D09M7C全新正品